In many drone applications the airspeed is an important information for reliable and controlled take off, landing and flight. The airspeed is most effectively measured with a pitot tube and a differential pressure sensor. Recently, PX4 integrated the differential pressure sensors sdp3x into an airspeed sensor development kit for VTOL and fixed wing UAV applications, which is fully integrated with the open source autopilot.
The integration includes a full aerodynamic software compensation model for the sensor and pitot tube making it a plug and play solution.
The development kit is now available on our store.
Lorenz Meier, founder and chief architect at PX4-Pro, says about the SDP3x sensor:
“Most airspeed sensors require calibration before every flight to guarantee accuracy, and are not sensitive enough to produce reliable readings at low airspeeds. The fully calibrated and temperature-compensated SDP3x sensor solves these problems and offers unprecedented accuracy and resolution. The calibration-free setup enables instant launch of VTOL drones, dramatically increasing the user experience for end users. And high sensitivity at low airspeeds allows closed-loop control during the transition phase from hovering to forward flight, increasing the reliability and safety of VTOL drones.”
Original article can be found in Sensirion’s website.
The SDP3x sensor family is Sensirion’s series of small differential pressure sensors designed for high-volume applications where size is a key requirement. It builds on the next generation CMOSens® sensor chip that is at the heart of Sensirion’s new differential pressure and flow sensing platform.
The digital SDP3x sensor features fast measurement speed, excellent accuracy, and long-term stability and has no zero-point drift. Furthermore, it is reflow solderable and provides extended functionality, such as smart averaging, multiple temperature compensation modes, configurable I2C address, and interrupts.
The analog SDP3x sensors offer a calibrated and temperature compensated analog voltage output. The output signal is configurable: different measurement speeds, output curves, and temperature compensations can be selected, even dynamically during operation mode.
Component SDP33 features :
Board Features :
Access Sensirion SDP3x Airspeed Sensor Kit user guide on Drotek Documentation here.
Drotek is a French Tech company located in south of France. The group has 2 main poles of expertise:
© 2022 Drotek SAS- All Rights Reserved